KTI Networks Switch 10/100/1000 Base-T Instalační příručka stáhnout pdf (Strana 36)

-36-

Each of them will be described in detail orderly in the following sections.

System Status

Product Name: To show the product name of this device.

Firmware Version: To show the firmware version of this switch.

Hardware Version: To show the hardware version of this switch.

Serial Number: The serial number is assigned by the manufacturer.

IP Address: To show the IP address of this switch.

Subnet Mask: To show the subnet mask of this switch.

Default Gateway: To show the default gateway of this switch.

MAC Address: To show the Ethernet MAC address of this switch.

System Name: To show the special name for this switch.

Auto Logout Timer: To show the setting of auto-logout timer in the web UI.

Ports Status

Port: Display the port number. The number is 1 - 24. Both port 23 and 24 are

optional modules.

Link Status: Link Status will show the current active link speed and duplex. Otherwise,

it shows [Down].

Speed: Display Auto or Forced the speed mode.

Flow Control: Show each port flow control status.

Aggregation

Normal: Display the ports that do not join any aggregation trunking group.

Group 1~8: Display the members of the Group.

VLAN

VLAN Mode: Display Port-based, Tag-based and metro mode, which depends on the

setting in VLAN mode configuration function.

ID: Display the Group ID.

Description: Display the description defined by administrator is associated with a

VLAN group.

VID: Display VLAN identifier. Each tag-based VLAN group has a unique VID.

It appears only in tag-based mode.

Member: Display the port members belonging to each VLAN Group.

Management Interface

State VLAN Tagging status of the switch management interface

VID VID used by the switch management interface

1 2 ... 31 32 33 34 35 36 37 38 39 40

Žádné komentáře

KTI Networks Switch 10/100/1000 Base-T Instalační příručka Strana 36