KTI Networks KGS-2421 Uživatelský manuál Strana 87
- Strana / 120
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Syntax:
LLDPMED ecs [<ecs_value>]
Parameters:
<ecs_value> : The value for the Emergency Call Service
14.4 policy delete
LLDPMED > policy delete help
Description:
Delete the selected policy.
Syntax:
LLDPMED policy delete [<policy_list>]
Parameters:
<policy_list> : List of policies to delete
14.5 policy add
LLDPMED > policy add help
Description:
Adds a policy to the list of polices.
Syntax:
LLDPMED policy add [voice|voice_signaling|guest_voice|guest_voice_signaling|soft
phone_voice|video_conferencing|streaming_video|video_signaling] [tagged|untagged
] [<vlan_id>] [<l2_priority>] [<dscp>]
Parameters:
vhoice : Voice for use by dedicated IP Telephony handsets and other
similar appliances supporting interactive voice services. These
devices are typically deployed on a separate VLAN for ease of
deployment and enhanced security by isolation from data
applications.
voice_signaling : Voice Signaling (conditional) for use in network topologies that
require a different policy for the voice signaling than for the voice
media.
- KGS-2421 KGS-1620 1
- TRADEMARKS 3
- Table of Contents 4
- 1. General 12
- 2.1 Configuration 13
- 2.2 Name 13
- 2.5 Timezone 14
- 2.3 Contact 14
- 2.4 Location 14
- 2.6 Reboot 15
- 2.7 Restore Default 15
- 2.8 Password 15
- 2.9 Load 15
- 2.10 Log 16
- 3.1 Configuration 17
- 3.2 DHCP 17
- 3.3 Setup 17
- 3.4 Ping 18
- 3.5 SNTP 18
- 4. Port (Port management) 19
- 4.3 Mode 20
- 4.4 FlowControl 20
- 4.5 MaxFrame 20
- 4.6 Power 21
- 4.7 Excessive 21
- 4.8 Statistics 22
- 4.9 VeriPHY 22
- 5. MAC (MAC address table) 23
- 5.3 Delete 24
- 5.4 Lookup 24
- 5.5 Agetime 24
- 5.6 Learning 24
- 5.7 Dump 25
- 5.8 Statistics 25
- 5.9 Flush 26
- 6. VLAN (Virtual LAN) 27
- 6.3 PVID 28
- 6.4 FrameType 28
- 6.5 IngressFilter 28
- 6.6 Add 29
- 6.7 Delete 29
- 6.8 Lookup 29
- 6.9 Status 30
- 7. PVLAN (Private VLAN) 31
- 7.4 Lookup 32
- 7.5 Isolate 32
- 8.1.2.2 Method 34
- 8.1.3 SSH( Secure Shell) 34
- 8.1.3.1 Configuration 34
- 8.1.4.1 Configuration 36
- 8.1.4.2 Mode 36
- 8.1.4.3 Redirect 36
- 8.1.5.1 Configuration 38
- 8.1.5.2 Mode 38
- 8.1.5.3 Version 38
- 8.1.5.4 Read Community 39
- 8.1.5.5 Write Community 39
- 8.1.5.6 Trap Mode 39
- 8.1.5.7 Trap Version 40
- 8.1.5.8 Trap Community 40
- 8.1.5.9 Trap Destination 40
- 8.1.5.11 Trap Link-up 41
- 8.1.5.12 Trap Inform Mode 41
- 8.1.5.13 Trap Inform Timeout 42
- 8.1.5.17 Trap Security Name 43
- 8.1.5.18 Engine ID 44
- 8.1.5.19 Community Add 44
- 8.1.5.20 Community Delete 44
- 8.1.5.21 Community Lookup 45
- 8.1.5.22 User Add 45
- 8.1.5.23 User Delete 45
- 8.1.5.24 User Changekey 46
- 8.1.5.25 User Lookup 46
- 8.1.5.26 Group Add 46
- 8.1.5.27 Group Delete 47
- 8.1.5.28 Group Lookup 47
- 8.1.5.29 View Add 47
- 8.1.5.30 View Delete 48
- 8.1.5.31 View Lookup 48
- 8.1.5.32 Access Add 48
- 8.1.5.33 Access Delete 49
- 8.2.2.1 Configuration 51
- 8.2.2.2 Mode 51
- 8.2.2.3 State 52
- 8.2.2.4 Reauthentication 52
- 8.2.2.5 ReauthPeriod 52
- 8.2.2.6 EapolTimeout 53
- 8.2.2.7 Agetime 53
- 8.2.2.8 Holdtime 53
- 8.2.2.9 Authenticate 54
- 8.2.2.10 Statistics 54
- 8.2.3.1 Configuration 55
- 8.2.3.2 Action 55
- 8.2.3.3 Policy 56
- 8.2.3.4 Rate 56
- 8.2.3.5 Add 56
- 8.2.3.6 Delete 58
- 8.2.3.7 Lookup 58
- 8.2.3.8 Clear 59
- 8.2.3.9 Status 59
- 8.3.1 Configuration 60
- 8.3.2 Timeout 60
- 8.3.3 Deadtime 60
- 8.3.4 RADIUS 60
- 8.3.5 Statistics 61
- 9.1 Configuration 62
- 9.2 Version 63
- 9.3 Txhold 63
- 9.4 MaxHops 63
- 9.5 MaxAge 63
- 9.6 FwdDelay 64
- 9.7 bpduFilter 64
- 9.8 bpduGuard 64
- 9.9 recovery 65
- 9.10 CName 65
- 9.11 Status 65
- 9.12 Msti Priority 66
- 9.13 Msti Map 66
- 9.14 Msti Add 66
- 9.15 Port Configuration 67
- 9.16 Port Mode 67
- 9.17 Port Edge 67
- 9.18 Port AutoEdge 68
- 9.19 Port P2P 68
- 9.20 Port RestrictedRole 68
- 9.21 Port RestrictedTcn 69
- 9.22 Port bpduGuard 69
- 9.23 Port Statistics 69
- 9.24 Port Mcheck 70
- 9.26 Msti Port Cost 70
- 9.27 Msti Port Priority 71
- 10.1 Configuration 72
- 10.2 Mode 72
- 10.3 State 73
- 10.4 Querier 73
- 10.5 Fastleave 73
- 10.6 Router 74
- 10.7 Flooding 74
- 10.8 Groups 74
- 10.9 Status 75
- 11.1 Configuration 76
- 11.2 Add 76
- 11.3 Delete 76
- 11.4 Lookup 77
- 11.5 Mode 77
- 12.1 Configuration 78
- 12.2 Mode 78
- 12.3 Key 78
- 12.4 Role 79
- 12.5 Status 79
- 12.6 Statistics 79
- 13.1 Configuration 81
- 13.2 Mode 81
- 13.3 Optional_TLV 82
- 13.5 Hold 83
- 13.6 Delay 83
- 13.7 Reinit 83
- 13.8 Info 83
- 13.9 Statistics 84
- 14.1 Configuration 85
- 14.2 Civic 85
- 14.3 ecs 86
- 14.4 policy delete 87
- 14.5 policy add 87
- 14.6 port policies 88
- 14.7 Coordinates 89
- 14.8 Datum 89
- 14.9 Fast 90
- 14.10 Info 90
- 14.11 debug_med_transmit_var 90
- 15.1 Configuration 92
- 15.2 Classes 92
- 15.3 Default 93
- 15.4 Tagprio 93
- 15.5 QCL Port 93
- 15.6 QCL Add 94
- 15.7 QCL Delete 95
- 15.8 QCL Lookup 95
- 15.9 Mode 95
- 15.10 Weight 96
- 15.11 Rate Limiter 96
- 15.12 Shaper 96
- 15.13 Storm Unicast 97
- 15.14 Storm Multicast 97
- 15.15 Storm Broadcast 98
- 16. Mirror (Port mirroring) 99
- 17.1 Save 101
- 17.2 Load 101
- Glossary 103
Související produkty a manuály pro Síťové přepínače KTI Networks KGS-2421
(23 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.061 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce